首页 > 分享 > 供应宠物GPS定位防丢器

供应宠物GPS定位防丢器

萌宠菠菠乐园
2024-12-26 03:17

颜色:黑工作电流:5（mA）工作电压:110-220（V）音量≥:180（dB）类型:跟踪定位器规格:51*46*17 适用范围:无照明功能:无属性:属性值颜色: 工作电流: 工作电压: 音量≥: 类型: 规格: 适用范围: 照明功能: 属性:

Specs.

Content

Specs.

Dim.

51mmx46mmx17mm

Weight

45g

Network

GSM/GPRS

Band

850/ 900/1800/1900Mhz

GPS chip

SIRF3 chip

GSM/GPRS module

Simcom900

GPS sensitivity

-159dBm

GPS accuracy

Time To First Fix

Cold status 45s

Warm status 35s

Hot status 1s

Car charger

12―24V input

5V output

Wall charger

110－220V input

5V output

Battery

Chargeable changeable 3.7V 850mAh Li-ion battery

Standby

60hours

Storage Temp.

-40°Cto +85°C

Operation Temp.

-20°Cto +55°C

Humidity

5%--95% non-condensing

Usage

SIM card installation

Make sure that there isnocall transferandcall display is on, andPIN codeoff. The SMS message must in Text format, can’t be identified for PDU format.

Steps:

1 Open the rear cover, and pick out the battery.

2 Push the foil along and turn it left.

3 Put the SIM card into the holder, and turn the foil right and fasten it in place.

5.2Battery and Charger

Do charge the battery to capacity in 8 -12 hours for first use. Please use the battery and charger provided by the manufacturer. This unit adopts built-in Li-ion battery, and full battery will support around 48 hours use on end. After first use, the battery can be charged fully in 3-5hours.

Cautions:

a:For it’s Li-ion battery, which contains harmful chemicals and may burst, please don’t bump, puncture it violently and keep it off fire.

b:Please charge the battery in time to keep it working normally.

5.3 Startup

l Put the SIM card and battery in place.

l Turn on the unitoutdoorsby pressing the “on/off” button until the indicator is on.

l For first use, please initialize the unit and restore it to default setting.( please refer to5.4for instruction.)

l In 10 or 40seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals. The indicator will keep flashing every 4 seconds when the unit has received the signals, otherwise it will keep on.

l When this unit receives GPS signals normally, you can use it and do all the following settings.

5.4 Initialization

Send “begin+password” in SMS to the unit, it will reply “begin ok” and initialize all the settings. (default password: 123456)

5.5 Change the password

Send SMS password+old password+space+new password to change the password.

Remark:

5.5.1Be sure keep the new password in mind, you have to upload the software to restore the original setting in case of losing the new password.

5.5.2Make sure the new password is in 6 digits, or else the tracker can not recognize the password.

5.6 Authorization

There are only 5 numbers able to be authorized.

5.6.1Call the tracker for 10 times, it will make the cell phone number as the authorized number automatically.

5.6.2Send SMS admin+password+space+cell phone number to set up a authorized number. The other authorized numbers should be set by the first authorized number. If the number is successfully authorized, the unit will reply “admin ok!” in SMS.

5.6.3Send SMS noadmin+password+space+authorized number to delete the authorized number.

5.6.4For roaming purpose, you have to add your country code ahead of the cell phone number, for example, please send admin123456 008613322221111 to tracker to set 13322221111 as an authorized number.